产品分类

2018年8月22日

5-Volt Active GPS Antenna USRP X310/X300,B210

This is a 5V active GPS antenna for onboard GPSDO (OCXO) or onboard GPSDO (TCXO). A GPSDO locked to GPS provides time synchronization and very high clock accuracy within 50ns of the global GPS standard.
2018年8月22日

VERT2450 Antenna

The VERT2450 is a dual-band 2.4 to 2.48 GHz and 4.9 to 5.9 GHz vertical omnidirectional antenna with a gain of 3 dBi.
2018年8月22日

LP0410 Antanna

The LP0410 is a 400MHz to 1 GHz logarithmic period PCB directional antenna with a gain of 5-6dBi. Suitable for any daughter board operating in the 400 MHz to 1 GHz frequency range. SMA connectors are available but need to be soldered in place.
2018年8月22日

VERT400 Antenna

The VERT400 is a 144MHz, 400MHz and 1200MHz tri-band 7-inch vertical omnidirectional antenna.
2018年8月22日

3-Volt Active GPS Antenna for N Series

This is a 3V active GPS antenna for the GPSDO kit used in the USRP N200 / N210 series. It has an integrated GPS (requires SMA to SMB adapter). GPSDO locked to GPS provides time synchronization and very high clock accuracy within 50ns of the global GPS standard.
2018年8月22日

LP0965 Antenna

LThe LP09650 is a logarithmic period PCB directional antenna from 850 MHz to 6.5 GHz with a gain of 5-6 dBi. Suitable for any daughter board operating in the 850 MHz to 6.5 GHz frequency range. SMA connectors are available but need to be soldered in place.
2018年8月22日

RF Rx/Tx board UBX-LW

The UBX-LW is a full-duplex transceiver that provides high-performance RF covering most frequency segments for coherent phase alignment in multi-channel MIMO and direction finding applications. The tuning range of bandwidth makes the UBX-LW an ideal application that covers all of the most common frequency bands, spanning high frequency, very high frequency, cellular, radar, and WIFI, and can be used for monitoring the entire band of interest. UBX-LW works alternately with existing USRP-LW daughter boards for seamless integration into your existing applications.
2018年8月22日

RF Rx/Tx board WBX-LW

The WBX-LW-40 provides a high-bandwidth transceiver that delivers up to 100mW of power output with a noise figure of 5 dB. The local oscillator's receive and transmit chains operate independently and can be synchronized for MIMO. It is an ideal SDR device for applications that want to access frequencies in the 50MHz-2200 MHz range. Applications include WiFi, WiMAX, S-band transceivers and 2.4 GHz ISM band transceivers. Applications include land mobile communications, marine and aerospace radios; mobile base stations, PCs and GSM multi-band radios; coherent multi-base radars; wireless sensor networks; broadcast television; and public safety management. Applicable to USRP-LW N200, USRP-LW N210, USRP-X310, USRP-X300.
2018年8月22日

USRP-LW 1

The USRP-LW 1 provides low-cost RF processing capabilities and is designed and developed for entry-level users with software-defined radio development capabilities. The product includes a Altera Cyclone FPGA, a 64MSPS dual ADC, and a 128 MSPS dual DAC to transfer data to the host via USB 2.0. The modular design allows the USRP-LW 1 to operate from DC to 6 GHz. This product allows the input of an external clock and 1 PPS for synchronization between multiple devices. The product can transmit up to 8MHz RF bandwidth back and forth in the host application, allowing users to implement custom signal functions on the FPGA.